It will not work on all models but newer models should work okay. Launch ISTA/D and move to Configuration -> Interface Edit configuration interface = STD:passthrud and save it!Ħ.
COPY all file from C:\Program files (x86)\BMW AG\PassThruD to C:\EDIABAS\BIN (default) EXCEPT EDIABAS.INIĥ. Choose the J2534 device you want and save itģ. Run BMW PassthruD in Administrator(Important!!!)Ģ. Install the driver for YOUR pass thru and then follow below:ġ. You first need to get the pass thru drivers from bmw. How to make Openport 2.0 J2534 works with BMW ISTA/DĬonfirm it its works with ISTA/D, install bmw passthru drivers and set ediabas.ini to: STD: psssthruD You can't run Tactrix Openport 2.0+ software together with KTMOBD and KTMflash software, otherwise the cable will be broken.
Tactrix Openport 2.0+ cable is related to the computer CPU, you are advised to run with the Intel processor, otherwise the cable will be broken if you use with AMD processor.Ĥ. No need to install the software, just copy the software from the CD and paste it on your computer desktop, then open it to use.ģ. Therefore, the user doesn't need to refer to any wiring diagram.Ģ. Tactrix Openport 2.0+ is plugged to the vehicle via OBD instead of dismantling the ECU. US Domestic Market Vehicles currently supported by EcuFlashġ.
